상세정보

KH80 DSP

2-웨이 니어필드 모니터



디지털 코어를 통해 KH80 DSP는 필터링 기능과 룸 조정 옵션을 제공하여 어떤 환경에서도 기준 레벨을 재생할 수 있습니다.

컴팩트한 디자인에도 불구하고 Neumann(노이만) 모니터 철학의 고전적인 장점인 명확한 분산 각도, 왜곡 없는 디자인 및 정교한 소재 선택과 같은 뛰어난 예비 용량을 갖추고 있습니다.

Spec

Free field frequency response: ±6 dB    53 Hz … 21 kHz

Free field frequency response: ±3 dB    57 Hz … 21 kHz

Free field frequency linearity deviation between 100 Hz and 10 kHz:    ± 0.7 dB

Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced:    ±0.26; ±0.23; ±0.17 dB

Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu):    <20 dB(A) SPL

Sine wave output with a THD < 0.5 % at 1 m in half space:    90 dB SPL (>200 Hz)

Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz):    108.8 dB SPL

Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz):    102.8 dB SPL

Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz):    96.8 dB SPL

Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions:    104 dB(C) SPL

Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range):    93 dB(C) SPL

Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer):    100 dB(C) SPL

Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range):    88 / 93 dB(C) SPL

Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer):    91 / 96 dB(C) SPL

Analog input(s):    XLR / 6.3 mm (¼”) Jack: analog electronically balanced

Analog input impedance:    14k Ohms

Max. input level:    +24 dBu for 94 dB SPL setting; +18 dBu for 100 dB SPL setting; +10 dBu for 108 dB SPL setting; +4 dBu for 114 dB SPL setting

Common mode rejection ratio (CMRR):    >56 dB @ 15 kHz

Volume control:    via Neumann.Control software

Volume control range; resolution:    0 … -∞ dB; 0.1 dB

Input gain control (sensitivity):    0 dB ... -15 dB

Output level control (output level in 1 m based on 0 dBu input level):    94; 100; 108; 114 dB SPL

Digital converter: resolution; design:    24-bit DAC; Δ∑

Digital converter: sampling rate:    48 kHz

Digital internal sampling rate:    48 kHz

Dynamic range A-D:    114 dB(A)

Dynamic range A-D-A:    111 dB(A) woofer; 112 dB(A) tweeter

Dynamic range D-A:    114 dB(A) woofer; 117 dB(A) tweeter

Latency:    2 ms (A-D-A linear phase)

Delay: User adjustable delay range    0 … 70 ms

Delay: Resolution: time; distance    0.1 ms; 3.44 cm (1 3/8”)

Delay: Max. frames Audio-video synchronisation (lip sync)    1.75 (40 ms frames); 2.1 (33 ms frames)

Delay: Time-of-flight maximum distance    24 m (79 ft)

Controller design:    Digital; active

Crossover frequency:    1.8 kHz

Crossover slope:    48 dB/oct; 8th order with phase correction

Equalization: Low-Mid    0; -1.5; -3; -4.5 dB

Equalization: via Neumann.Control software    8 x full parametric IIR + low / high shelf global balance

FIR phase correction:    Linear phase (170 Hz ... 16 kHz; +/- 45°)

Protection circuitry:    Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers

Infrasonic filter: frequency; slope    61 Hz; 12 dB/Okt.

Remote control:    Neumann.Control software via an RJ45 connector carrying standard IP data

Display: On; Normal Operation    Neumann logo “White”

Display: Identification    Neumann logo “Rosé”

Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute    Neumann logo “Red”

Display Brightness:    via Neumann.Control

Output power woofer amplifier (THD+N with limiter deactivated: 10%):    120 W

Output power tweeter amplifier (THD+N with limiter deactivated: 10%):    70 W

Output power woofer amplifier (THD+N with limiter deactivated: 0.1%):    90 W

Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%):    50 W

Mains Power Supply: input voltage; frequency:    100-240 V; 50/60 Hz

Power consumption (230 V / 100 V): Standby:    <330 / <50 mW

Power consumption (230 V / 100 V): Idle    9 / 8 W

Power consumption (230 V / 100 V): Full output    180 W

In-rush current (Peak):    20 A

Standby    Disabled; 90 mins (default); user defined in software

Cabinet material    Composite polycarbonate

Cabinet surface finish; color (front / back)    Painted; metallic anthracite (RAL 7021) / Black (RAL 9005)

Operating conditions    +10° C to +40° C (+50° F to +104° F); <75% RH; non-condensing

Transport/storage conditions    -25° C to +60° C (-13° F to 158° F); <90% RH; non-condensing

Woofer    100 mm (4") with protecting black metal grille

Tweeter    25 mm (1") with protecting black metal grille

Mounting points    2 x M6 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm (5/8”)

Product dimensions (height x width x depth)    233 x 154 x 194 mm (9 1/8" x 6" x 7 5/8")

External net volume    6.7 liters

Product weight    3.5 kg (7 lbs 8 oz)

Packed dimensions (height x width x depth), mm (inches)    345 x 277 x 243 mm (13 5/8" x 10 7/8" x 9 5/8")

Packed weight    4.1 kg (9 lbs 1 oz)

Packed cube    0.023 m³

Neumann (Sennheiser)

KH80 DSP (Pair)

₩ 1,760,000

17,600P 적립